How to Increase Wi-Fi Range and Signal Strength
Wi-Fi signal is valuable. Moving away from the router causes your Wi-Fi connection to weaken. If you go far enough, you will enter the black zone, where Wi-Fi cannot reach. In such case, you may be wondering how you may improve your Wi-Fi signal. Can you make it stronger throughout the house? Into the backyard? What about your neighbors?
You can, according to the response. Here’s how to increase your Wi-Fi signal strength and range so you never lose connectivity again.
How to Boost Your Wi-Fi Signal
Increasing your Wi-Fi signal requires a multi-pronged strategy. Here are six techniques to improve your Wi-Fi signal and get faster Wi-Fi speeds:
- Upgrade your router to 802.11ac or 802.11ax
- Reposition your router to improve Wi-Fi signal
- Change to wireless mesh for improved Wi-Fi signal coverage. Improve your Wi-Fi receivers and antennas.
- Use a Wi-Fi extension (also known as a repeater)
- Make a DIY Wi-Fi antenna booster
- Update your router firmware
- Change your Wi-Fi channel
Let’s take a look at each option in detail.
1. Upgrade Your Router to 802.11ac or 802.11ax
A router update is one of the simplest ways to improve Wi-Fi signal. Your Wi-Fi performance will suffer if you continue to use an older 802.11g or 802.11n router. Older Wi-Fi standards, which are used by older routers, do not have the same strength or signal throughput as a new router that uses the current 802.11ac Wi-Fi standard.
The data speed over comparable transmission lengths is perhaps the most important difference between the previous standards and the newer 802.11ac standard. As an example:
- 802.11n, introduced in 2009, can transmit at 600Mbps (75MB/s) across a maximum range of 300 feet outside and 150 feet inside.
- 802.11ac, which was announced in 2014, can broadcast at roughly 1.13Gbps (166.25MB/s) across a comparable range.
The difference is night and day.
What Is 802.11ax?
Every few years, the IEEE updates the 802.11 wireless standards. The 802.11ac standard first appeared in routers in 2014 and is still the most frequently used Wi-Fi technology in the world.
The IEEE was collaborating with router makers and other device developers in 2019 to implement the new 802.11ax Wi-Fi standard. 802.11ax, like other Wi-Fi standard improvements, enhances speed, range, and the number of devices that may interact with a single router at the same time. Another notable 802.11ax update is the increase in the amount of Wi-Fi channels accessible to your network, with 256 sub-channels introduced to alleviate network congestion. Despite the fact that upgrading from ac Wi-Fi to ax Wi-Fi provides considerable benefits, most consumers do not prioritize replacing their Wi-Fi router.
Solution: If you can afford it, invest in an 802.11ax router. Even with ax’s replacement, 802.11be, on the horizon, you’re future-proofing your home network for the next generation of wireless gadgets that will certainly enter your house.
However, an 802.11ac router will keep your home network operational for at least another decade, so don’t get too worked up about it. (Some 802.11ax router costs are outrageous!)
2. Move Your Router to Boost Your Wi-Fi Signal
When you place your Wi-Fi signal beneath the stairs, it degrades. Or under a chunk of steel covered in aluminum foil in a closet. When researching how to increase your Wi-Fi range, router location is critical. Placing your router behind a huge solid item will definitely reduce your Wi-Fi range.
The optimal position is usually a corridor in the center of your home, where the Wi-Fi signal can spread evenly. That, of course, is not always practicable.
Solution: Move your router away from debris, bulky objects, and other things that might interfere with your Wi-Fi signal. If feasible, use longer cords to transfer your router from its present location.
3. Switch to Wireless Mesh for Greater Wi-Fi Coverage
A wireless mesh network is a fantastic technique to guarantee that your Wi-Fi connection is constant throughout your house. Mesh Wi-Fi often employs more than one network equipment to provide a continuous Wi-Fi signal across your house (or business, etc.). As a consequence, your downstairs hallway receives the same signal as your upstairs bathroom, and so on.
Unlike a Wi-Fi signal extender, which generates an additional extended network, a mesh network employs a single unified wireless network. Mesh networks have long been utilized in places like retail malls, athletic events, and festivals. However, in recent years, mesh Wi-Fi technology has made its way into the house.
Wireless mesh networks are also simple to expand. Instead of spending time setting a Wi-Fi extender or booster, most wireless mesh network devices join to the current network nearly instantly. Wireless mesh networks, in this regard, are a good alternative for a number of Wi-Fi range extension scenarios.
Mesh Wi-Fi systems are priced differently based on coverage, speed, and the number of bases necessary to blanket your house in wonderful Wi-Fi.
Solution: Upgrade to a wireless mesh network to significantly improve the consistency of your home network.
4. Upgrade Your Wi-Fi Antennas and Receivers
An antenna on your router broadcasts Wi-Fi across your house. In addition to upgrading to an 802.11ac router, you should also consider updating your antennae. There are numerous obvious advantages of adding stronger antennas:
- Broadcast range has been extended: One of the most enticing advantages of a high-gain router is the possibility of increasing your Wi-Fi broadcast range. Having Wi-Fi in every area of your home from a single router seems like a fantastic concept. Broadcast control:
- A directional antenna replaces a high-gain omnidirectional antenna for precise control over your Wi-Fi broadcast direction.
- Increased Wi-Fi speed: In addition to the increased broadcast range, you may see an improvement in total throughput for improved efficiency.
Upgrading the antenna on your router is a simple and fast way to improve your Wi-Fi connection.
Solution: Check the compatibility of your router and decide which antennas are appropriate for your network equipment.
Upgrade Your Wi-Fi Receivers
You may update your gadget if it uses a plug-in receiver. For example, if you have a desktop that connects to the internet through a Wi-Fi dongle, be sure it is at least 802.11ac. You will notice a reduced Wi-Fi speed if the receiver on your device is outdated.
Solution: Check the wireless standard of any Wi-Fi receiver. If it isn’t up to standard—at the very least 802.11ac—time it’s to update.
5. Use a Wi-Fi Extender (AKA Repeaters)
If you have a new 802.11ac router but still have problems with Wi-Fi connection, you may install a wireless extender. Wireless extenders allow you to increase the range of your Wi-Fi across your house without the need for extra wires or sophisticated networking. Wi-Fi extenders, for the most part, are plug-and-play, however this varies by model.
A powerline Wi-Fi extension is maybe the most basic choice. Powerline adapters connect to your existing electrical socket. You attach a separate outlet near your router and use an Ethernet wire to link the two. You simply add another adapter anywhere you need to boost your Wi-Fi signal, and presto! You have Wi-Fi in every room and on every level.
Powerline adapters, on the other hand, are only as good as your home’s electrical wiring. If your house is very old, a powerline Wi-Fi extension may not provide the signal increase you want. Here are a few distinctions between a Wi-Fi extender and a powerline adaptor.
Solution: Consider the age of your home’s wiring. If it is really old, a dual-band Wi-Fi extender is an excellent way to improve Wi-Fi signal. Otherwise, look into powerline adapters with dual-band Wi-Fi. (As an added bonus, powerline adapters have Gigabit Ethernet connections!)
6. Make a DIY Wi-Fi Antenna Booster
The DIY Wi-Fi antenna booster is another basic but efficient alternative. You may quickly and simply build a DIY Wi-Fi signal enhancer with household components. Do you not trust me?
Check out Ian Buckley’s Pringles Cantenna.
Follow his video to learn how to build your own Wi-Fi signal booster cantenna!
The kind of DIY antenna you need is determined by the distance your signal must travel. Numerous internet guides describe how different kinds of DIY Wi-Fi signal boosters function, how to build one, and how to optimize its performance.
Solution: Use Ian’s instruction to boost your Wi-Fi signal. Faulty router firmware is one factor that might be affecting your Wi-Fi connection. Although this is improbable since router firmware changes are rare, it is always recommended to update to the most recent version of your router firmware whenever feasible. If you’ve been having problems with Wi-Fi signal or connection, a firmware update may bring security and bug improvements.
7. Upgrade Your Router Firmware
Upgrading your router firmware is a straightforward operation, and there are various custom router firmware alternatives available.
Solution: Look up your router model and see if a firmware update is available. Install it if there is one.
Your Wi-Fi signal is also influenced by the Wi-Fi channel that your router employs. Your router, after all, most certainly transmits on two bands: 2.4GHz and 5GHz. There are several channels inside the two bands, some of which overlap and cause interference. Changing the Wi-Fi channel on your router has the potential to improve your Wi-Fi connection by minimizing interference.
8. Change Your Wi-Fi Channel
Furthermore, the most recent iteration of Wi-Fi, 802.11ax, also known as Wi-Fi 6 and Wi-Fi 6E, now includes an extra 6GHz Wi-Fi band. If you can find a router with 6GHz Wi-Fi, you’ll almost certainly be the only one on your block utilizing the latest technology, which means greater Wi-Fi signal than ever before.
Solution: Change your router’s Wi-Fi channel in the router settings to a less crowded channel.
One of the options listed above should improve your Wi-Fi signal across your house. Some will even let you to expand your Wi-Fi connection into your garage, garden, and so on. Wi-Fi signal problems are a scourge of contemporary life, so don’t suffer in silence.
Boost Your Wi-Fi Signal
One of the above solutions should increase your Wi-Fi signal throughout your home. Some will even let you extend your Wi-Fi signal into your garage, down to your garden, and so on. Wi-Fi signal issues are a bane of modern life, so don’t sit around suffering.
You are looking for information, articles, knowledge about the topic How to Increase Wi-Fi Range and Signal Strength on internet, you do not find the information you need! Here are the best content compiled and compiled by the appsladder.com team, along with other related topics such as: How To.
Related videos about How to Increase Wi-Fi Range and Signal Strength
[‘‘]
.jpg)
