10 Ways to Keep Your AirPods Batteries From Draining Too Fast

Rate this post
10 Ways to Keep Your AirPods Batteries From Draining Too Fast

Using wireless AirPods requires you to maintain track of their remaining battery level and make sure they’re charged and ready to go anytime you want to go out.

The batteries in your AirPods will eventually run out of power, and you may find yourself unable to listen to everything you want before they die.

To address this, let’s take a look at everything you can do to keep your AirPods’ batteries from depleting so quickly.

1. Store Your AirPods in the Case

If you’ve been using wired earphones for a long time, you may think it’s safe to remove your AirPods from your ear and set them aside until your next usage.

One issue with this behavior is the possibility of losing your AirPods. However, if you do not place your AirPods in the case, they will continue to lose battery life. This is due to the earphones still being linked to your device’s Bluetooth.

Even if you switch off Bluetooth, your AirPods stay active and available to connect at any time for your convenience. As a result, remember to put your AirPods back in their case when not in use to prevent them from losing battery.

2. Don’t Open and Close Your AirPods Case Lid Repeatedly

Every AirPods user has undoubtedly been guilty of repeatedly flicking the case cover open and close, similar to clicking a pen cap or moving the slider of retractable USB drives.

However, each time you open and shut the charging case, you activate your AirPods’ Bluetooth and then deactivate it. Sending continuous instructions like this depletes the battery life of your AirPods.

This occurs whether or not the AirPods are in the case. Place the case someplace your hands can’t reach after you’ve properly matched and linked your AirPods!

3. Disable Automatic Ear Detection

Have you ever noticed how your AirPods precisely halt a music or movie when you remove one earbud from your ear and resume play when you replace it?

  How to Setup Git on a Mac

The useful feature that allows this function is Automatic Ear Detection. However, it depletes the batteries in your AirPods. If Automatic Ear Detection isn’t a must-have function for you, you may disable it:

  1. Select Bluetooth from the Settings app.
  2. Make sure your AirPods are paired with your iPhone.
  3. Next to your AirPods, tap the More Info I button.
  4. Use the toggle to disable Automatic Ear Detection. Close the case and place your AirPods inside.

4. Turn Off Noise Cancellation

Noise cancellation improves your listening experience by cutting out background noise. However, the function depletes the power of your AirPods.

This function is only available on the AirPods Pro and AirPods Max; the basic AirPods do not. So, figure out which AirPods you have, and if you have the first two versions, you can disable noise canceling to save battery life.

Go to Settings > Bluetooth after your AirPods Pro or AirPods Max are linked to your smartphone. Next to your AirPods, tap the More Info I icon. Select Off under Noise Control.

5. Use Only One AirPod at a Time

Assume you’re preparing to watch a two-hour-long live broadcast, but you notice your AirPods are only 40% charged.

In this instance, you may extend the battery life by utilizing just one AirPod at a time. Meanwhile, leave your second AirPod in the case to charge.

This strategy isn’t always desirable since it has an impact on the user experience. However, since only half of the battery capacity is being utilized at once, it’s the most practical approach to keep your AirPods from dying when you need them.

6. Lower the Volume of Your AirPods

Turning up the volume to fully appreciate a music is a pleasurable experience. However, if you’re listening to a 3-hour playlist at near-maximum volume, you’ll undoubtedly notice that your AirPods are dying even if you’ve just completely charged them.

As a result, in addition to utilizing just one AirPod at a time, decreasing the volume may assist to preserve battery life and keep your AirPods’ battery from depleting too quickly. This method also saves your hearing; continuously blasting the volume is hazardous in the long run.

  What are the Guest Additions in VirtualBox and how do you install them?

7. Practice Good AirPods Charging Habits

Many of us are undoubtedly guilty of draining our AirPods’ battery entirely. However, if this happens often, it can rapidly deplete your battery. As a result, your AirPods may not be charging as well as they used to.

When it goes below 40 or 50 percent, place your AirPods back in their case to charge. The same is true for your AirPods case. Don’t wait till the battery is completely depleted before charging it.

Similarly, avoid overcharging your AirPods. While it’s safe to leave your AirPods in their case while not in use, it’s easy to forget you’re charging your AirPods case after plugging it in. Set a reminder to disconnect it, and don’t charge both your AirPods and their case overnight.

8. Enable Optimized Battery Charging

The Optimized Battery Charging function in the AirPods (3rd generation) and AirPods Pro learns from your charging habits. Because your AirPods will only charge over 80 percent when you’re ready to use them, this function protects battery health.

Taking care of the battery can help avoid future wear that might otherwise decrease the charge-holding capacity of your AirPods. To activate the function, go to Settings > Bluetooth, press More Info I on your AirPods, then turn on Optimized Battery Charging.

9. Reset Your AirPods

Resetting your iPhone is a good option if you’re experiencing significant battery consumption. The same is true for your AirPods.

Here’s how to reset your AirPods if they’re depleting faster than usual:

  1. Wait 30 seconds before opening the case cover.
  2. Open the Settings app on your smartphone and choose Bluetooth.
  3. Next to your AirPods, tap the More Info I button.
  4. To confirm, tap Forget Device.
  5. Select Forget This Device.
  6. Press the circular Setup button on your AirPods case for 15 seconds while the lid is still open. The status light should begin to flicker amber and eventually white.
  7. To use your AirPods again, just reattach them to your smartphone.
  8. Lastly, simply reconnect your AirPods to your device to use them again.
  How to Post to Instagram from a Computer or a Mac

10. Repair or Replace Your AirPods’ Battery

If nothing works, it’s possible that your AirPods need to be repaired. In this situation, you may contact an Apple Authorized Service Provider to repair or replace the batteries. This service normally does not repair the physical batteries, but instead provides new AirPods. It’s not always free, but it’s less expensive than purchasing fresh new AirPods.

If you like your existing AirPods, there’s no need to replace them every year. Paying for a new battery is an excellent method to solve the problem. It’s also more environmentally responsible since it guarantees that your old AirPods are recycled in whatever way possible.

Preserve the Battery Life of Your AirPods

AirPods, like any technological gadgets, have problems now and then, although they are frequently easily resolved by the user. By following the steps outlined below, you should be able to extend the life of your AirPods’ battery when viewing movies, listening to music, or making phone calls.

If you regularly find that the battery of your AirPods dies quickly, it may be time to reconsider how you’re caring for your gadget to ensure that you’re not inadvertently hastening the battery’s degeneration.

You are looking for information, articles, knowledge about the topic 10 Ways to Keep Your AirPods Batteries From Draining Too Fast on internet, you do not find the information you need! Here are the best content compiled and compiled by the appsladder.com team, along with other related topics such as: How To.

Related videos about 10 Ways to Keep Your AirPods Batteries From Draining Too Fast


[‘
‘]

Similar Posts